Z18CWN13
Specifications Inconel 702 Datasheet, Inconel 702 Chemical, Inconel 702 Properties Steelmelting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these m
| Product parameters | |
| Material Category:: | Stainless Steel |
| Steel Grade: | Z18CWN13 |
| Material Technical Standards:: | NF |
| Specification Code:: | NF A35-578 - 1991 |
| Place of Origin: | France |
Description
SPECIFICATION & DATASHEET - Grade Z18CWN13
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY - Heat resistant steel series
EX-STOCK - Diameter 160mm, 205mm
Technical standards - NF A35-578 - 1991
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.15 ~ 0.20
Si (％): ≤ 0.50
Mn (％): ≤ 0.50
P (％)≤: 0.035
S (％)≤: 0.015
Cr (％): 12.0 ~ 14.0
Ni (％): 1.80 ~ 2.20
Mo (%): ≤ 0.50
W (%): 2.50 ~ 3.50
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: Quenched 1000 Deg. C, oil / air cooled, and tempered 620 Deg. C min.
Tensile strength,σb/≥ MPa: 960
Yield strength, σ0.2/≥ MPa: 760
Elongation, δ ≥(％): 15.0
hardness / HBS: 300 ~ 355
PRODUCT DESCRIPTION
The alloy is usually produced by BEF / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - quenched and tempered
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 to 550mm
Square bar / Flat bar: T3.0 to 500mm X W3.0 ~ 400mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T30 - 400mm X W70 - 1200mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 3mm X W10 - 400mm X L, or in coil form
Steel strip via cold rolled: T0.10 - 3mm X W5.0 - 600mm X L (or in coil form)
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, you can reach or EMAIL our qualified production engineers, Email: sales@cnlhss.com
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY - Heat resistant steel series
EX-STOCK - Diameter 160mm, 205mm
Technical standards - NF A35-578 - 1991
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.15 ~ 0.20
Si (％): ≤ 0.50
Mn (％): ≤ 0.50
P (％)≤: 0.035
S (％)≤: 0.015
Cr (％): 12.0 ~ 14.0
Ni (％): 1.80 ~ 2.20
Mo (%): ≤ 0.50
W (%): 2.50 ~ 3.50
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: Quenched 1000 Deg. C, oil / air cooled, and tempered 620 Deg. C min.
Tensile strength,σb/≥ MPa: 960
Yield strength, σ0.2/≥ MPa: 760
Elongation, δ ≥(％): 15.0
hardness / HBS: 300 ~ 355
PRODUCT DESCRIPTION
The alloy is usually produced by BEF / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - quenched and tempered
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 to 550mm
Square bar / Flat bar: T3.0 to 500mm X W3.0 ~ 400mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T30 - 400mm X W70 - 1200mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 3mm X W10 - 400mm X L, or in coil form
Steel strip via cold rolled: T0.10 - 3mm X W5.0 - 600mm X L (or in coil form)
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, you can reach or EMAIL our qualified production engineers, Email: sales@cnlhss.com
