AMS 5598
Stocklist AMS 5598 Specifications AMS 5598D, Suppliers AMS 5598 Inventory, Datasheet AMS 5598 Chemical from Steel melting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treat, Straightening, 100% Ultrasonic flaw detection test, Cold working or Ma
Description
MATERIAL SPECIFICATION DATASHEET - Grade AMS 5598
Material Category - Aerospace Material Steel Series
Techncial Specifications - AMS 5598D
HS Code for Customs - 72221100 / 72221900 / 72223000
Stocklist on hand - Round bar diam.20mm ~ 120mm
Official Test Report - issued by TUV - SGS - BV
Chemical compositions ( Mass Weight - % )
C (％): ≤ 0.08
Mn (％): ≤ 0.35
Si (％): ≤ 0.35
P (％) ≤: 0.015
S (％) ≤: 0.015
Cr (％): 14.0 ~ 17.0
Ni (%): 70.0 Min.
Nb (%): 0.70 ~ 1.20
Ti (%): 2.25 ~ 2.75
Al (%): 0.40 ~ 1.00
Co (%): ≤ 1.00
Ta (%): ≤ 0.05
Cu (%): ≤ 0.50
Fe (%): 5.00 ~ 9.00
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: Bars, plate, strip and forgings
Heat treatment condition: -
Tensile strength, σb/MPa: 931
Yield strength, σ0.2/MPa: -
Elongation, δ(％): 18.0
Reduction of area, ф (％): -
Hardness | HRW: -
PROFILE & DIMENSIONS
Round bar: 5.5mm to 400mm
Square bar / Flat bar: 10mm to 550mm
Wire rod: 1.0mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 8 ~ 220mm
Length: Fixed length or random length or based on the customer's special requirement.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com
Material Category - Aerospace Material Steel Series
Techncial Specifications - AMS 5598D
HS Code for Customs - 72221100 / 72221900 / 72223000
Stocklist on hand - Round bar diam.20mm ~ 120mm
Official Test Report - issued by TUV - SGS - BV
Chemical compositions ( Mass Weight - % )
C (％): ≤ 0.08
Mn (％): ≤ 0.35
Si (％): ≤ 0.35
P (％) ≤: 0.015
S (％) ≤: 0.015
Cr (％): 14.0 ~ 17.0
Ni (%): 70.0 Min.
Nb (%): 0.70 ~ 1.20
Ti (%): 2.25 ~ 2.75
Al (%): 0.40 ~ 1.00
Co (%): ≤ 1.00
Ta (%): ≤ 0.05
Cu (%): ≤ 0.50
Fe (%): 5.00 ~ 9.00
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: Bars, plate, strip and forgings
Heat treatment condition: -
Tensile strength, σb/MPa: 931
Yield strength, σ0.2/MPa: -
Elongation, δ(％): 18.0
Reduction of area, ф (％): -
Hardness | HRW: -
PROFILE & DIMENSIONS
Round bar: 5.5mm to 400mm
Square bar / Flat bar: 10mm to 550mm
Wire rod: 1.0mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 8 ~ 220mm
Length: Fixed length or random length or based on the customer's special requirement.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com
