X3CrNiCuTiNb12-9
Specifications X3CrNiCuTiNb12-9 Datasheet, Suppliers X3CrNiCuTiNb12-9 Chemical, Bar Property X3CrNiCuTiNb12-9 forgings From Melting, ESR & VAR technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test ASTM E2375 /S
| Product parameters | |
| Material Category:: | Superalloy |
| Steel Grade: | X3CrNiCuTiNb12-9 |
| Material Technical Standards:: | DIN |
| Specification Code:: | DIN 17445,17440(1999/1996), DIN EN 10088-1, 10297,10272,10312 |
| Place of Origin: | Germany |
Description
TECHNICAL DATA SHEET - Grade X3CrNiCuTiNb12-9
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
INVENTORY SALES - Diameter 55mm / 60mm
MATERIAL CATEGORY - Martensitic stainless steel
CHEMICAL COMPOSITION ( Mass Weight %)
C (％): ≤ 0.05
Si (％): ≤ 0.50
Mn (％): ≤ 0.50
P (％)≤: 0.030
S (％)≤: 0.015
Cr (％): 11.0 ~ 12.5
Ni (％): 7.50 ~ 9.50
Mo (％): ≤ 0.50
Nb (%): 0.15 ~ 0.50
Cu (%): 1.50 ~ 2.50
Ti (％): 0.90 ~ 1.40
MECHANICAL PROPERTIES UNDER HEAT TREATMENT
Condition: AT + Aged + SRA
Tensile strength, σb/MPa: 1585
Yield strength, σ0.2/MPa: 1480
Elongation, δ(％): 8.0
Reduction of area, ф ≥ (％): -
Impact strength, Akv ≥/J: -
Hardness via heat treatment /HBW: 480 Max.
METHOD OF MELTING
The alloy is usually produced by BEF - AOD / EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
TYPICAL APPLICATIONS
Chemical equipments.
Mechanical parts used in the condition of corrosion resistance.
Bolts and nuts.
Pressure vessel parts.
Shaft, forgings and parts for Turnbine.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 550mm
Flat bar / plate (Thickness X Width): 10 ~ 400 X 15 ~ 650mm
Plate: 0.5 ~ 300 X 12 ~ 600 X Lmm
Length: random length, fixed length or based on the customer's special requirement.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@cnlhss.com
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
INVENTORY SALES - Diameter 55mm / 60mm
MATERIAL CATEGORY - Martensitic stainless steel
CHEMICAL COMPOSITION ( Mass Weight %)
C (％): ≤ 0.05
Si (％): ≤ 0.50
Mn (％): ≤ 0.50
P (％)≤: 0.030
S (％)≤: 0.015
Cr (％): 11.0 ~ 12.5
Ni (％): 7.50 ~ 9.50
Mo (％): ≤ 0.50
Nb (%): 0.15 ~ 0.50
Cu (%): 1.50 ~ 2.50
Ti (％): 0.90 ~ 1.40
MECHANICAL PROPERTIES UNDER HEAT TREATMENT
Condition: AT + Aged + SRA
Tensile strength, σb/MPa: 1585
Yield strength, σ0.2/MPa: 1480
Elongation, δ(％): 8.0
Reduction of area, ф ≥ (％): -
Impact strength, Akv ≥/J: -
Hardness via heat treatment /HBW: 480 Max.
METHOD OF MELTING
The alloy is usually produced by BEF - AOD / EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
TYPICAL APPLICATIONS
Chemical equipments.
Mechanical parts used in the condition of corrosion resistance.
Bolts and nuts.
Pressure vessel parts.
Shaft, forgings and parts for Turnbine.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 550mm
Flat bar / plate (Thickness X Width): 10 ~ 400 X 15 ~ 650mm
Plate: 0.5 ~ 300 X 12 ~ 600 X Lmm
Length: random length, fixed length or based on the customer's special requirement.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@cnlhss.com
