AISI S1 - T41901 Cr-W-V Tool Steel
| Product parameters | |
| Material Technical Standards:: | ASTM A681 - 2004 |
| Place of Origin: | P. R. China |
| Terms of Price:: | Ex works, CIF, and CFR |
| Surface Condition:: | Peeled - Rough turned - Shot blasted - Bright surface. |
| Ultrasonic Test Standard:: | ASTM E2375 / MIL-STD- AMS 2154 / SEP 1923 / GB/T 4162 / EN 10228-3 / EN 10308. |
| Production Lead Time:: | Within 75 days after 30% downpayment. |
| Company ISO Register No:: | UQ211218R0 |
Description
| C (％) | 0.45 ～ 0.55 |
| Si(％) | 0.25 ～ 0.45 |
| Mn(％) | 0.20 ～ 0.40 |
| P(％) | ≤ 0.030 |
| S (％) | ≤ 0.030 |
| Cr (％) | 1.25 ～ 1.75 |
| Ni (％) | - |
| Mo(％) | ≤ 0.40 |
| Other (％) | W 1.50 ～ 3.00 V 0.15 ～ 0.30 |
| Condition of heat treatment | annealing |
| Tensile Rm (MPa) | - |
| Yield Rp0.2 (MPa) | - |
| Elongation A (%) | - |
| Reduction in cross section on fracture Z (%) | - |
| Impact AKV/AKU (J) | - |
| Brinell Hardness (HBW) | 183 ～ 229 |
| Products Shapes and Dimensions: Round bar (Diameter): 5.50 ~ 44mm Square bar / Flat bar: 3 ~ 450mm Wire rod (Diameter): 1.0 ~ 13mm Steel strip via cold rolled: T0.1 - 3mm X W5 - 600mm X L (or in coil form) Forging piece: Different shapes based on OEM |
