L605
Specifications L605 datasheet, L605 Chemical, Ex-stock L605 Properties from Steelmelting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these material
| Product parameters | |
| Material Category:: | Stainless Steel |
| Steel Grade: | L605 |
| Specification Code:: | Cr - Ni - W - Co base alloy |
| Place of Origin: | USA |
Description
MATERIAL STANDARDS DATA SHEET - Grade Alloy L605
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY - Cr - Ni - W - Co base alloy
INVENTORY ON STOCK - Wire rod (0.2mm, 0.5mm, 1.0mm)
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.05 ~ 0.15
Si (％): ≤ 0.40
Mn (％): 1.00 ~ 2.00
P (％)≤: 0.025
S (％)≤: 0.015
Cr (％): 19.0 ~ 21.0
Ni (％): 9.00 ~ 10.0
Mo (％): -
Co (%): Remainder
W (%): 14.0 ~ 16.0
Al (%): -
Cu (%): -
Ti (%): -
Fe (% ): ≤ 3.0
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, σb/≥ MPa: 1005
Yield strength, σ0.2/MPa: 480
Elongation, δ ≥(％): 51.0
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBC: 33 ~ 43
FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 300mm
Square bar / Flat bar: 3 ~ 350mm
Wire rod (Diameter): 0.10 ~ 12mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 400mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Other sizes can be supplied to meet specific requirements.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our qualified production engineers.
E-mail us: sales@cnlhss.com
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY - Cr - Ni - W - Co base alloy
INVENTORY ON STOCK - Wire rod (0.2mm, 0.5mm, 1.0mm)
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.05 ~ 0.15
Si (％): ≤ 0.40
Mn (％): 1.00 ~ 2.00
P (％)≤: 0.025
S (％)≤: 0.015
Cr (％): 19.0 ~ 21.0
Ni (％): 9.00 ~ 10.0
Mo (％): -
Co (%): Remainder
W (%): 14.0 ~ 16.0
Al (%): -
Cu (%): -
Ti (%): -
Fe (% ): ≤ 3.0
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, σb/≥ MPa: 1005
Yield strength, σ0.2/MPa: 480
Elongation, δ ≥(％): 51.0
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBC: 33 ~ 43
FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 300mm
Square bar / Flat bar: 3 ~ 350mm
Wire rod (Diameter): 0.10 ~ 12mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 400mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Other sizes can be supplied to meet specific requirements.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our qualified production engineers.
E-mail us: sales@cnlhss.com
