Contact Us
East district of New high-tech industrial park, Jiangyou City, Sichuan Province, China
86 - 15386611557
www.cnlhss.com
You are here: Home > Stainless Steel

1.4037 Round bar, X65Cr13 Flat bar in stock

Product parameters
Material Category:: Martensitic Stainless Steel Series
Steel Grade: X65Cr13
Specification Code:: DIN 17445,17440(1999/1996), DIN EN 10088-1, 10297,10272,10312
Stocklist & Inventory Available:: Round bar Diam. 15 ~ 60mm
Melting Process Route:: EAF + LF + VD / + ESR, BEF + ESR
Min. order quantity Per Batch:: 200 KG
Certification:: Commercial Invoice, Packing list, CO, Bill of lading, Origin of Certificate, Form E
Ultrasonic Test Standard:: ASTM E2375 / MIL-STD- AMS 2154 / SEP 1923 / GB/T 4162 / EN 10228-3 / EN 10308.
Production Lead Time:: Within 15 days after 30% downpayment.
Company ISO Register No:: UQ211218R0
INQUIRY
Description
Introduction:
X65Cr13 is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
100% Ultrasonic test
ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
Bars are usually supplied black/bright in the annealed condition.

Applications:
Commonly used in industries such as offshore, marine, food, paper mills, oil field and aerospace.
X65Cr13 used for components such as fasteners, couplings, screws, bushings, studs, fittings, valve stems, roller, wear rings.

All Grades Comparison
DIN W-Nr
X65Cr13 W-Nr 1.4037

Chemical Composition (Weight %)
C Si Mn P S Cr Ni Mo Other
0.58 ~ 0.70 ≤ 1.00 ≤ 1.00 ≤ 0.040 ≤ 0.015 12.5 ~ 14.5 - - -

Mechanical Properties
Condition of heat treatment Tensile
Rm(MPa)
Yield
Rp0.2(MPa)
Elongation
A(%)
Reduction in cross
section on fracture
Z (%)
Impact
AKV/AKU(J)
Brinell
Hardness(HBW)
Annealing ≤ 840 - - - - ≤ 265
Q/T - - - - - -

Forms and Shapes:
Round bar (Diameter): 5.5 mm to 700 mm
Wire rod (Diameter): 0.10 ~ 16mm
Square bar / Flat bar: 5mm to 550mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)

 

Submit an enquiry for the displaying steel materials you are interested in TODAY!