UNS T51605 / AISI P5 Chromium Based Tool Steel
| Product parameters | |
| Material technical standards:: | ASTM A681 - 2004 |
| Place of origin:: | P.R. China |
| Terms of price:: | Ex works, CIF, CFR |
| Production lead time:: | Within 65 days after 40% deposit prepayable |
| Company ISO register No.:: | UQ211218R0 |
Description
| C (％) | 0.06 ～ 0.10 |
| Si(％) | 0.10 ～ 0.40 |
| Mn(％) | 0.20 ～ 0.60 |
| P(％) | ≤ 0.030 |
| S (％) | ≤ 0.030 |
| Cr (％) | 2.00 ～ 2.50 |
| Ni (％) | - |
| Mo(％) | - |
| Other (％) | ≤ 0.35 |
| Condition of heat treatment | annealing |
| Tensile Rm (MPa) | - |
| Yield Rp0.2 (MPa) | - |
| Elongation A (%) | - |
| Reduction in cross section on fracture Z (%) | - |
| Impact AKV/AKU (J) | - |
| Brinell Hardness (HBW) | 105 ～ 110 |
| The alloy is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3. Bars are usually supplied black/bright in the annealed condition. |
| Forms and Dimensions: Round bar (Diameter): 5.50 ~ 550mm Square bar / Flat bar: 3 ~ 610mm Wire rod (Diameter): 1.0 ~ 13mm Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form) Forging piece: Different shapes based on OEM |
