Products

Contact Us
East district of New high-tech industrial park, Jiangyou City, Sichuan Province, China
86 - 15386611557
www.cnlhss.com
You are here: Home > Tool Steel
UNS T13110 / M10 High Speed Steel
UNS T13110 / M10 High Speed Steel

UNS T13110 / M10 High Speed Steel

Product parameters
Material Category:: Molybdenum type High Speed Steel
Min. order quantity Per Batch:: 1300 KG
Product Shapes:: Round bar, Flat bar, Plate
Ultrasonic Test Standard:: ASTM E2375 / MIL-STD- AMS 2154 / SEP 1923 / GB/T 4162 / EN 10228-3 / EN 10308.
Production Lead Time:: Within 55 days after 30% downpayment.
Unified Social Credit Code:: 91510871777942750J
Company ISO Register No:: UQ211218R0
INQUIRY
Description
 
UNS T13110 / M10 high-speed steel is a molybdenum-based high-speed tool steel in American standards, and the grade of M10 steel is Mo8Cr4V2 steel. The main alloying element of molybdenum high-speed tool steel is molybdenum, which does not contain tungsten or contains a small amount of tungsten. Its main characteristics are fine carbide particles, uniform distribution, good toughness, but high decarburization sensitivity and overheat sensitivity, and a narrow range of hot processing and heat treatment.

The alloy is usually produced by EAF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
Bars are usually supplied black/bright in the annealed condition.

Main Chemical Composition (mass weight %)
C (％) 0.84 ～ 0.94
Si(％) 0.20 ～ 0.45
Mn(％) 0.10 ～ 0.40
P(％) ≤ 0.030
S (％) ≤ 0.030
Cr (％) 3.75 ～ 4.50
Ni (％) -
Mo(％) 7.75 ～ 8.50
Other (％) V  1.80 ～ 2.20

Mechanical Properties Under Room Temperature.
Condition of heat treatment annealing
Tensile Rm (MPa) -
Yield Rp0.2 (MPa) -
Elongation A (%) -
Reduction in cross section on fracture Z (%) -
Impact AKV/AKU (J) -
Brinell Hardness (HBW) 207 ～ 235
Product Shapes:
Round bar (Diameter): 5.50 ~ 650mm
Square bar / Flat bar: 3 ~ 650mm
Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM

Submit an enquiry for the displaying steel materials you are interested in TODAY!

sales@cn-steels.com