STS304J2
Specifications STS304J2 Datasheet, Inventory STS304J2 Chemical, Suppliers STS304J2 Stcoklist Properties Technical specifications - KS D3705 - 2001 / 2006. From Melting, ESR & VAR technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening
| Product parameters | |
| Material Category:: | Stainless Steel |
| Steel Grade: | STS304J2 |
| Material Technical Standards:: | KS |
| Specification Code:: | KS D3705 - 2001 / 2006 |
| Place of Origin: | Korea |
Description
TECHNICAL DATASHEET - Grade STS304J2
Technical Specifications - KS D3705 - 2001 / 2006
Official Test Certificate - issued by TUV - SGS - BV
HS Code For Customs - 72201100 / 72202030 / 72221100
Material Category - Hot / cold rolled Stainless steel Plate, Strip
Inventory & Stocklist - Diameter 10 ~ 115mm
Chemical Composition ( Mass Weight % )
C (％): ≤ 0.08
Si (％): ≤ 1.75
Mn (％): 3.00 ~ 5.00
P (％) ≤: 0.045
S (％) ≤: 0.030
Cr (％): 15.0 ~ 18.0
Ni (％): 6.00 ~ 9.00
Mo (％): -
N (%): -
Cu (％): 1.00 ~ 3.00
MECHANICAL PROPERTY UNDER ROOM TEMP.
Condition: Solution annealing, 1020 ~ 1060 Deg. C .
Tensile strength, σb/ ≥ MPa: 450
Yield strength, σ0.2/ ≥ MPa: 155
Elongation, δ (％) ≥: 40.0
Reduction of area, ф (％) ≥: -
Hardness under solution anneal ≤ (HBW): 187
MELTING PROCESS
The alloy is usually produced by AOD / EAF / VOD, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 550mm
Strip / Plate (Thickness X width X Length): 0.5 ~ 3.0mm X 10 ~ 1500mm X Lmm
Flat bar (Thickness X Width): 4 ~ 300 X 15 ~ 600mm
Length: random length, fixed length or based on the customer's special requirement.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@cnlhss.com
Technical Specifications - KS D3705 - 2001 / 2006
Official Test Certificate - issued by TUV - SGS - BV
HS Code For Customs - 72201100 / 72202030 / 72221100
Material Category - Hot / cold rolled Stainless steel Plate, Strip
Inventory & Stocklist - Diameter 10 ~ 115mm
Chemical Composition ( Mass Weight % )
C (％): ≤ 0.08
Si (％): ≤ 1.75
Mn (％): 3.00 ~ 5.00
P (％) ≤: 0.045
S (％) ≤: 0.030
Cr (％): 15.0 ~ 18.0
Ni (％): 6.00 ~ 9.00
Mo (％): -
N (%): -
Cu (％): 1.00 ~ 3.00
MECHANICAL PROPERTY UNDER ROOM TEMP.
Condition: Solution annealing, 1020 ~ 1060 Deg. C .
Tensile strength, σb/ ≥ MPa: 450
Yield strength, σ0.2/ ≥ MPa: 155
Elongation, δ (％) ≥: 40.0
Reduction of area, ф (％) ≥: -
Hardness under solution anneal ≤ (HBW): 187
MELTING PROCESS
The alloy is usually produced by AOD / EAF / VOD, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 550mm
Strip / Plate (Thickness X width X Length): 0.5 ~ 3.0mm X 10 ~ 1500mm X Lmm
Flat bar (Thickness X Width): 4 ~ 300 X 15 ~ 600mm
Length: random length, fixed length or based on the customer's special requirement.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@cnlhss.com
