Jethete M152, S64152) ESR Martensitic Heat‑Resistant Steel
| Product parameters | |
| Material category:: | Martensitic hardening stainless steel |
| Stock & Inventory available:: | Round bar, flat bar, forgings |
Description
TECHNICAL DATA SHEET
Jethete M152 is a high quality special steel along with an ESR electroslag remelted martensitic heat‑resistant stainless steel. It supplies excellent creep strength, impact toughness & oxidation resistance under medium‑high temperature service up to 560 ℃.
MATERIAL SPECIFICATIONS
AMS 5719
ASTM A565 TYPE XM‑32
BS S151
EN 1.4938
Z12CNDV12
DTD 5066
MSRR 6503
TYPICAL CHEMICAL COMPOSITIONS (mass fraction - %)
Carbon, C: 0.08 ~ 0.13
Silicon, Si: ≤ 0.35
Manganese, Mn: 0.50 ~ 0.90
Phosphorus, P: ≤ 0.025
Sulfur, S: ≤ 0.015
Chromium, Cr: 11.0 ~ 12.5
Nickel, Ni: 2.00 ~ 3.00
Molybdenunm, Mo: 1.50 ~ 2.00
Niobium, Nb / Ti: -
Vanadium, V: 0.25 ~ 0.40
Nitrogen, N: 0.01 ~ 0.05
HEAT TREATMENT CYCLE AND MECHANICAL PROPERTIES
Heat treatment temperature and cooling: 1010℃ quenched, air or oil cooled, 565℃ min. tempered, heat treated
Tensile strength, Rm : 930 ~ 1130 MPa
Yield strength, Rp0.2: ≥ 760 MPa
Elongation, A5 ≥: 14.0 %
Hardness, HBW: 288 ~ 331
Remark: properties adjustable according to final heat treatment requirement
KEY ADVANTAGES
- ESR Electroslag remelting: high purity, low inclusion, stable microstructure for critical safety parts
- Outstanding creep & fatigue performance at 400‑550℃ working temperature
- Good notch toughness, reduce failure risk under cyclic load
- Complete traceability: heat report, UT/MT nondestructive inspection, AMS material certification available
- Custom service: round bar, forged billet, rough machined parts, annealing / quenched‑tempered supply condition
- Sample support for material verification before bulk order
AVAILABLE SHAPES AND SPECIFICATIONS
- Round bar: black bar, peeled bright bar
- Forged blocks, forgings
- Plate, sheet
- Supply condition: annealed, quenched and tempered
- Diameter / Size: customized as drawing
- NDT: UT, MT, MPI inspection optional
TYPICAL APPLICATIONS
- Aerospace engine compressor blades and components
- High‑temperature bolts, fasteners
- Steam turbine blades
- Gas turbine structural parts
- High‑strength components working under medium‑temperature cyclic load
FREQUENTLY ASKED QUESTIONS
Q1: Can you supply M-152 with AMS 5719 certification?
A: Yes, ESR M-152 can be supplied with full material test report & AMS certification.
Q2: Can you arrange M152 sample for lab testing?
A: Samples are available, sample cost and lead time depend on sample dimensions.
Q3: What is typical lead‑time for M152?
A: Stock size fast delivery; non‑standard forged parts require production cycle.
Q4: Can you provide heat treatment service for M152?:
A: We generally supply annealed material, and QT quenched‑tempered materials as per the customer requirement.
TECHNICAL SALES ASSISTANCE & SERVICE
20+ years focus on special steel manufacturing and processing.
Stock over 60 grades with a competitive price.
If you are interested in our products or services, or would like to learn more about us, pleased to EMAIL (sales@cn-steels.com) our qualified production engineers or sales department.
Jethete M152 is a high quality special steel along with an ESR electroslag remelted martensitic heat‑resistant stainless steel. It supplies excellent creep strength, impact toughness & oxidation resistance under medium‑high temperature service up to 560 ℃.
MATERIAL SPECIFICATIONS
AMS 5719
ASTM A565 TYPE XM‑32
BS S151
EN 1.4938
Z12CNDV12
DTD 5066
MSRR 6503
TYPICAL CHEMICAL COMPOSITIONS (mass fraction - %)
Carbon, C: 0.08 ~ 0.13
Silicon, Si: ≤ 0.35
Manganese, Mn: 0.50 ~ 0.90
Phosphorus, P: ≤ 0.025
Sulfur, S: ≤ 0.015
Chromium, Cr: 11.0 ~ 12.5
Nickel, Ni: 2.00 ~ 3.00
Molybdenunm, Mo: 1.50 ~ 2.00
Niobium, Nb / Ti: -
Vanadium, V: 0.25 ~ 0.40
Nitrogen, N: 0.01 ~ 0.05
HEAT TREATMENT CYCLE AND MECHANICAL PROPERTIES
Heat treatment temperature and cooling: 1010℃ quenched, air or oil cooled, 565℃ min. tempered, heat treated
Tensile strength, Rm : 930 ~ 1130 MPa
Yield strength, Rp0.2: ≥ 760 MPa
Elongation, A5 ≥: 14.0 %
Hardness, HBW: 288 ~ 331
Remark: properties adjustable according to final heat treatment requirement
KEY ADVANTAGES
- ESR Electroslag remelting: high purity, low inclusion, stable microstructure for critical safety parts
- Outstanding creep & fatigue performance at 400‑550℃ working temperature
- Good notch toughness, reduce failure risk under cyclic load
- Complete traceability: heat report, UT/MT nondestructive inspection, AMS material certification available
- Custom service: round bar, forged billet, rough machined parts, annealing / quenched‑tempered supply condition
- Sample support for material verification before bulk order
AVAILABLE SHAPES AND SPECIFICATIONS
- Round bar: black bar, peeled bright bar
- Forged blocks, forgings
- Plate, sheet
- Supply condition: annealed, quenched and tempered
- Diameter / Size: customized as drawing
- NDT: UT, MT, MPI inspection optional
TYPICAL APPLICATIONS
- Aerospace engine compressor blades and components
- High‑temperature bolts, fasteners
- Steam turbine blades
- Gas turbine structural parts
- High‑strength components working under medium‑temperature cyclic load
FREQUENTLY ASKED QUESTIONS
Q1: Can you supply M-152 with AMS 5719 certification?
A: Yes, ESR M-152 can be supplied with full material test report & AMS certification.
Q2: Can you arrange M152 sample for lab testing?
A: Samples are available, sample cost and lead time depend on sample dimensions.
Q3: What is typical lead‑time for M152?
A: Stock size fast delivery; non‑standard forged parts require production cycle.
Q4: Can you provide heat treatment service for M152?:
A: We generally supply annealed material, and QT quenched‑tempered materials as per the customer requirement.
TECHNICAL SALES ASSISTANCE & SERVICE
20+ years focus on special steel manufacturing and processing.
Stock over 60 grades with a competitive price.
If you are interested in our products or services, or would like to learn more about us, pleased to EMAIL (sales@cn-steels.com) our qualified production engineers or sales department.
Submit an enquiry for the displaying steel materials you are interested in TODAY!
Review











