STS 430LX
Specifications STS 430LX Datasheet, Inventory STS 430LX Chemical, Supplier STS430LX Stcoklist Properties Technical specifications - KS D3705 - 2001 / 2006. From Melting, ESR & VAR technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightenin
| Product parameters | |
| Material Category:: | Stainless Steel |
| Steel Grade: | STS 430LX |
| Material Technical Standards:: | KS |
| Specification Code:: | KS D3705 - 2001 / 2006 |
| Place of Origin: | Korea |
Description
TECHNICAL DATASHEET - Grade STS 430LX
Technical Specifications - KS D3705 - 2001 / 2006
Official Test Certificate - issued by TUV - SGS - BV
HS Code For Customs - 72201100 / 72202030 / 72221100
Material Category - Hot / cold rolled Stainless steel Plate, Strip
Inventory & Stocklist - Diameter 115mm
Chemical Composition ( Mass Weight % )
C (％): ≤ 0.030
Si (％): ≤ 0.75
Mn (％): ≤ 1.00
P (％) ≤: 0.045
S (％) ≤: 0.030
Cr (％): 16.0 ~ 19.0
Ni (％): ≤ 0.60
Mo (％): -
Ti/Nb (%): 0.10 ~ 1.00
MECHANICAL PROPERTY UNDER ROOM TEMP.
Condition: annealing, 820 ~ 900 Deg. C .
Tensile strength, σb/ ≥ MPa: 360
Yield strength, σ0.2/ ≥ MPa: 175
Elongation, δ (％) ≥: 22.0
Reduction of area, ф (％) ≥: -
Hardness under solution anneal ≤ (HBW): 200
MELTING PROCESS
The alloy is usually produced by AOD / EAF / VOD, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 450mm
Strip / Plate (Thickness X width X Length): 0.5 ~ 3.0mm X 10 ~ 1000mm X Lmm
Flat bar (Thickness X Width): 4 ~ 300 X 15 ~ 300mm
Length: random length, fixed length or based on the customer's special requirement.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@cnlhss.com
Technical Specifications - KS D3705 - 2001 / 2006
Official Test Certificate - issued by TUV - SGS - BV
HS Code For Customs - 72201100 / 72202030 / 72221100
Material Category - Hot / cold rolled Stainless steel Plate, Strip
Inventory & Stocklist - Diameter 115mm
Chemical Composition ( Mass Weight % )
C (％): ≤ 0.030
Si (％): ≤ 0.75
Mn (％): ≤ 1.00
P (％) ≤: 0.045
S (％) ≤: 0.030
Cr (％): 16.0 ~ 19.0
Ni (％): ≤ 0.60
Mo (％): -
Ti/Nb (%): 0.10 ~ 1.00
MECHANICAL PROPERTY UNDER ROOM TEMP.
Condition: annealing, 820 ~ 900 Deg. C .
Tensile strength, σb/ ≥ MPa: 360
Yield strength, σ0.2/ ≥ MPa: 175
Elongation, δ (％) ≥: 22.0
Reduction of area, ф (％) ≥: -
Hardness under solution anneal ≤ (HBW): 200
MELTING PROCESS
The alloy is usually produced by AOD / EAF / VOD, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 450mm
Strip / Plate (Thickness X width X Length): 0.5 ~ 3.0mm X 10 ~ 1000mm X Lmm
Flat bar (Thickness X Width): 4 ~ 300 X 15 ~ 300mm
Length: random length, fixed length or based on the customer's special requirement.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@cnlhss.com
