AISI M10 / T11310 Molybdenum Type Tool Steel
| Product parameters | |
| Place of origin:: | P. R. China |
| Min. order quantity:: | 1300 KG |
| Product shapes:: | Round bar, Flat bar, Plate |
| Production lead time:: | Within 55 days after 30% downpayment. |
| Unified social credit code:: | 91510871777942750J |
| Company ISO register No.:: | UQ211218R0 |
Description
M10 is employed in tooling applications requiring excellent wear and cutting, capabilities including punches, cutters, taps, drills, broaches, planer tools, etc.
The alloy is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
Bars are usually supplied black/bright in the annealed condition.
Chemical Composition (Weight %)
P(％) ≤ 0.030 , S (％) ≤ 0.030
Cr (％) 3.75 ～ 4.50, Ni (％) - , Mo(％) 7.75 ～ 8.50 , V (％) 1.80 ～ 2.20
| Condition of heat treatment | annealing |
| Tensile Rm (MPa) | - |
| Yield Rp0.2 (MPa) | - |
| Elongation A (%) | - |
| Reduction in cross section on fracture Z (%) | - |
| Impact AKV/AKU (J) | - |
| Brinell Hardness (HBW) | 207 ～ 235 |
| Forms and dimensions Round bar (Diameter): 5.50 ~ 650mm Square bar / Flat bar: 3 ~ 650mm Wire rod (Diameter): 0.10 ~ 16mm Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form) Forging piece: Different shapes based on OEM |
