UNS S38100 / XM-15 Corrosioni-Resistant Steel
This specification covers a heat-treatable corrosion-resistant steel in the form of bars, wire ,forgings, mechanical tubing, and stock for forging or heading.
| Product parameters | |
| Material category:: | Austenitic Stainless Steel |
| Material technical standards:: | ASTM A276 |
| Terms of price:: | Ex works, CIF, CFR |
| Product shapes:: | Round bars, flat bars, forgings, ring |
| Surface condition:: | Cold machined, bright |
| Standard export packing way:: | Wooden box, pallet, or per buyer |
| Production lead time:: | Within 55 days after 40% deposit prepayable |
| Unified social credit code:: | 91510871777942750J |
Description
Technical Data Sheet
The alloy is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
Bars are usually supplied black/bright in the annealed condition. Forms and Shapes:
This specification covers a heat-treatablecorrosion-resistant steel in the form of bars wire forgings, mechanical tubing,and stock for forging or heading.
Round bar (Diameter): 5.50 ~ 650mm
Square bar / Flat bar: 3 ~ 650mm
Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM
| C (％) | ≤ 0.08 |
| Si(％) | 1.50 ～ 2.50 |
| Mn(％) | ≤ 2.00 |
| P(％) | ≤ 0.045 |
| S (％) | ≤ 0.030 |
| Cr (％) | 17.0 ～ 19.0 |
| Ni (％) | 17.5 ～ 18.5 |
| Mo(％) | - |
| Other (％) | - |
| Condition of heat treatment | - |
| Tensile Rm (MPa) | 515 |
| Yield Rp0.2 (MPa) | 205 |
| Elongation A (%) | 40 |
| Reduction in cross section on fracture Z (%) | - |
| Impact AKV/AKU (J) | - |
| Brinell Hardness (HBW) | - |
