EN100
Description EN100 datasheet, EN100 Chemical, EN100 Properties from Steelmaking, Blooming, Hot forging, Hot rolling, Heat treat, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standa
| Product parameters | |
| Material Category:: | Structure Steel |
| Steel Grade: | EN100 |
| Material Technical Standards:: | BS |
| Specification Code:: | BS970 Part 3 |
| Place of Origin: | England |
Description
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
TECHNICAL SPECIFICATION DATASHEET - EN100
MATERIAL CATEGORY - Aircraft "S" series alloy structural steel
TYPE OF STEEL - 850MPa low alloy steel
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.35 ~ 0.45
Si (％): ≤ 0.50
Mn (％): 1.20 ~ 1.50
P (％)≤: 0.035
S (％)≤: 0.030
Cr (％): 0.30 ~ 0.60
Ni (%): 0.50 ~ 1.00
Mo (％): 0.15 ~ 0.25
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: Heat treatment
Tensile strength σb≥/MPa: 980
Yield strength σs≥/MPa: 835
Elongation δ5≥(%): 12.0
Impact, AKV≥/J: -
Hardness HBS: -
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nut
Multidiameter shaft
Pressure vessel, seamless pipe
PRODUCT PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 500mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W60 - 1000mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail:sales@cnlhss.com.
TECHNICAL SPECIFICATION DATASHEET - EN100
MATERIAL CATEGORY - Aircraft "S" series alloy structural steel
TYPE OF STEEL - 850MPa low alloy steel
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.35 ~ 0.45
Si (％): ≤ 0.50
Mn (％): 1.20 ~ 1.50
P (％)≤: 0.035
S (％)≤: 0.030
Cr (％): 0.30 ~ 0.60
Ni (%): 0.50 ~ 1.00
Mo (％): 0.15 ~ 0.25
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: Heat treatment
Tensile strength σb≥/MPa: 980
Yield strength σs≥/MPa: 835
Elongation δ5≥(%): 12.0
Impact, AKV≥/J: -
Hardness HBS: -
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane, guided missile, weapons, railway, bridges, pressure vessel, machine tools, mechanical components with a bigger sectional size and so on.
Power generation – turbine fasteners – boiler support rods
Process plant – fasteners
Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nut
Multidiameter shaft
Pressure vessel, seamless pipe
PRODUCT PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 500mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W60 - 1000mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail:sales@cnlhss.com.
