AMS 5580
Inventory AMS 5580 Specifications, Suppliers AMS 5580 Datasheet, Chemical Properties AMS 5580 Stockholder from Steelmelting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working
| Product parameters | |
| Material Category:: | Stainless Steel |
| Steel Grade: | AMS 5580 |
| Material Technical Standards:: | AMS |
| Specification Code:: | AMS 5580L |
| Place of Origin: | USA |
Description
MATERIAL TECHNICAL STANDARD - Grade AMS 5580
MATERIAL CATEGORY - Aerospace Material Steel Series
TECHNICAL SPECIFICATION - AMS 5580L
HS CODE - 72221100 / 72221900 / 72223000
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (WEIGHT - %)
C (％): ≤ 0.15
Si (％): ≤ 1.00
Mn (％): ≤ 0.50
P (％)≤: 0.030
S (％)≤: 0.015
Cr (％): 14.0 ~ 17.0
Ni (％): 72.0 Min.
Co (％): ≤ 1.00
Nb (％): ≤ 1.00
Ti (％): ≤ 0.50
Al (%): ≤ 0.35
Cu (%): ≤ 0.50
Fe (%): 6.00 ~ 10.00
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: Bars, plate, tubings and forgings
Heat treatment condition: solution annealing treated
Tensile strength, σb/MPa: 552
Yield strength, σ0.2/MPa: 207
Elongation, δ(％): 30.0
Reduction of area, ф (％): -
Hardness | HRW: 361min, HRC 36min.
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Basic Electric Furnace (EAF, AOD, VOD) or VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 500mm
Square bar / Flat bar: 10mm to 550mm
Wire rod: 0.5mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 350mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com
MATERIAL CATEGORY - Aerospace Material Steel Series
TECHNICAL SPECIFICATION - AMS 5580L
HS CODE - 72221100 / 72221900 / 72223000
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (WEIGHT - %)
C (％): ≤ 0.15
Si (％): ≤ 1.00
Mn (％): ≤ 0.50
P (％)≤: 0.030
S (％)≤: 0.015
Cr (％): 14.0 ~ 17.0
Ni (％): 72.0 Min.
Co (％): ≤ 1.00
Nb (％): ≤ 1.00
Ti (％): ≤ 0.50
Al (%): ≤ 0.35
Cu (%): ≤ 0.50
Fe (%): 6.00 ~ 10.00
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: Bars, plate, tubings and forgings
Heat treatment condition: solution annealing treated
Tensile strength, σb/MPa: 552
Yield strength, σ0.2/MPa: 207
Elongation, δ(％): 30.0
Reduction of area, ф (％): -
Hardness | HRW: 361min, HRC 36min.
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Basic Electric Furnace (EAF, AOD, VOD) or VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar: 5.5mm to 500mm
Square bar / Flat bar: 10mm to 550mm
Wire rod: 0.5mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 350mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@cnlhss.com
