UNS S41800 | AMS 5508 Stainless Steel Strip
ASTM A565 Grade 615, is A Martensitic Stainless Steel also known as
S441800, AMS5508,, Equivalent standards are similar to one or more standards provided by the supplier.
S441800, AMS5508,, Equivalent standards are similar to one or more standards provided by the supplier.
| Product parameters | |
| Material Category:: | Martensitic Stainless Steel |
| Material Technical Standards:: | AMS 5508 |
| Stocklist & Inventory Available:: | Steel Strip 0.7X 200mm |
| Heat Treatment Practice:: | Annealed 730 ℃, furnace cooled |
| Standard Export Packing Way:: | Wooden box, pallet / tray free from fumigation |
| Production Lead Time:: | Within 65 days after 40% deposit prepayable |
Description
| C (％) | 0.15 ～ 0.20 |
| Si(％) | ≤ 0.50 |
| Mn(％) | ≤ 0.50 |
| P(％) | ≤ 0.040 |
| S (％) | ≤ 0.030 |
| Cr (％) | 12.0 ～ 14.0 |
| Ni (％) | 1.80 ～ 2.20 |
| Mo(％) | ≤ 0.50 |
| Other (％) | W 2.50 ～ 3.50 |
| Condition of heat treatment | Annealed |
| Tensile Rm (MPa), Max. | 1034 |
| Yield Rp0.2 (MPa) | |
| Elongation A (%), Min. | 10.0 |
| Reduction in cross section on fracture Z (%) | |
| Impact AKV/AKU (J) | - |
| Brinell Hardness (HBW), Max. | 305 |
The alloy is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements. Bars are usually supplied black/bright in the Quenched and tempered condition. |
Forms and Shapes Available Round bar (Diameter): 10 ~ 250mm Square bar / Flat bar: 15 ~ 650mm Wire rod (Diameter): 1.00 ~ 13mm Steel strip via cold rolled: T0.4 - 3mm X W5 - 200 X Lmm Forging piece: Different shapes based on OEM |
