AISI A2317 / SAE 2317 Round bar Forgings
| Product parameters | |
| Material technical standards:: | SAE J1249 - 2000 |
| Place of origin:: | P.R. China |
| Min. order quantity:: | 1300 KG |
| Customs HS code:: | 722840 / 722850 |
| Ultrasonic test standard:: | ASTM E2375 / MIL-STD- AMS 2154 / SEP 1923 / GB/T 4162 / EN 10228-3 / EN 10308 |
| Customization service:: | Negotiable |
| Production lead time:: | Within 65 days after 40% deposit prepayable |
| Company ISO register No.:: | UQ211218R0 |
Description
| The alloy is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3. Bars are usually supplied black/bright in the annealed condition. |
Main Chemical Composition (mass weight %)
| Condition of heat treatment | - |
| Tensile Rm (MPa) | 490~640 |
| Yield Rp0.2 (MPa) | 345 |
| Elongation A (%) | 22 |
| Reduction in cross section on fracture Z (%) | 50 |
| Impact AKV/AKU (J) | - |
| Brinell Hardness (HBW) | - |
| Shapes & Dimensions: Round bar (Diameter): 5.50 ~ 650mm Square bar / Flat bar: 3 ~ 650mm Wire rod (Diameter): 0.10 ~ 16mm Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form) Forging piece: Different shapes based on OEM |
