S64152 Forgings, XM-32 Hexagon bar
| Product parameters | |
| Material category:: | Martensitic Stainless Steel Series |
| Material technical standards:: | ASTM A565 / A565M |
| Terms of price:: | Ex works, CIF, and CFR |
| Stock & Inventory available:: | Diameter 55 ~ 220mm |
| Min. order quantity:: | 1300 KG |
| Heat treatment practice:: | Hardened 1050 ℃, water or oil cooled, tempered 640 ~ 690 ℃, double tempered |
| Ultrasonic test standard:: | EN 10308, MIL-STD-AMS 2154 CLa |
| Production lead time:: | Within 45 days after 30% deposit prepayable |
Description
| C (％) | ≤ 0.15 |
| Si(％) | ≤ 1.00 |
| Mn(％) | ≤ 2.00 |
| P(％) | ≤ 0.04 |
| S (％) | 0.12 ～ 0.25 |
| Cr (％) | 17.0 ～ 19.0 |
| Ni (％) | 8.00 ～ 10.0 |
| Mo(％) | ≤ 0.60 |
| Other (％) | Pb 0.12 ～ 0.30 |
| Condition of heat treatment | - |
| Tensile Rm (MPa) | - |
| Yield Rp0.2 (MPa) | - |
| Elongation A (%) | - |
| Reduction in cross section on fracture Z (%) | - |
| Impact AKV/AKU (J) | - |
| Brinell Hardness (HBW) | - |
| The alloy is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3. Bars are usually supplied black/bright in the annealed condition. |
Forms and Dimensions Available Round bar (Diameter): 5.50 ~ 650mm Square bar / Flat bar: 3 ~ 650mm Wire rod (Diameter): 0.10 ~ 16mm Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form) Forging piece: Different shapes based on OEM |
