PH13-8Mo / S13800 Ring XM-13 Martensitic Stainless Steel
This page provides PH13-8Mo Round bar stock, S13800 Flat bar datasheet - mechanical properties, chemical element, performance specifications.
| Product parameters | |
| Specification Code:: | ASTM A564 (2003) |
| Terms of Price:: | Ex works, CIF, CFR |
| Stocklist & Inventory Available:: | Diameter 105 / 150mm |
| Melting Process Route:: | VIM + ESR / VAR |
| Min. order quantity Per Batch:: | 500 kg |
| Product Shapes:: | Round bars, flat bars, ring |
| Standard Export Packing Way:: | Wooden box, pallet / tray free from fumigation |
| Production Lead Time:: | Within 65 days after 40% deposit prepayable |
Description
PRODUCT DESCRIPTION
The alloy is usually produced by VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution + ageing treated.
TYPICAL APPLICATIONS
Chemical equipment, Mechanical parts used in the condition of corrosion resistance.
Automobile parts, exhaust pipe, Electronics, Turbine motor blade.
Bolt and nut, Valve, Pressure vessel.
TECHNICAL SPECIFICATION DATASHEET - Grade PH13-8Mo
MATERIAL CATEGORY - Precipitation hardening stainless steel
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.05, Si (％): ≤ 0.10, Mn (％): ≤ 0.20, P (％)≤: 0.010, S (％)≤: 0.008
Cr (％): 12.3 ~ 13.2, Ni (％): 7.50 ~ 8.50, Mo (％): 2.00 ~ 2.50, Al (％): 0.90 ~ 1.35
N (%): ≤ 0.01, Fe (%): Remanider.
MECHANICAL PROPERTIES AFTER HEAT TREATMENT
Solution treatment temperature and cooling ways: 927 +/-15℃
Rm, σb≥/MPa: -
Rp, σ0.2≥/MPa: -
Elongation, δ≥ (％): -
Hardness ≤|HBS: 363
PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 400mm
Square bar / Flat bar: 3mm to 400mm
Length: Fixed length or random length or based on the customer's special requirement.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
